Tuesday, September 30, 2014
Monday, September 29, 2014
Fall colors
Fall is coming fast, see the view from home of the Park City water job
Week long job at Park City area home with very long days, now into demolition phase. At the end of the day we do have this view to enjoy.
Friday, September 26, 2014
Thursday, September 25, 2014
Determine which Dehumidifier to use.
Determine which Dehumidifier to Use
Dehumidifiers ate tool that simply remove water from the air. Much like any other tool, there are situations where a dehumidifier will work well, and other times when a certain technology would be inefficient. General Guidelines.
LGR: Low Grain Refrigerant.
Use in most residential / small commercial situations.
Good for warm/high humidity conditions
Adequate for drier conditions down to 34 gpp
Portable Desiccant:
use for difficult to dry situations, such as difficult class-4 losses.
Use if a structure cannot be warmed to a temperature where LGR's would be effective.
Conventional:
Use for simple/small losses.
IICRC RSA
LGR: Low Grain Refrigerant.
Use in most residential / small commercial situations.
Good for warm/high humidity conditions
Adequate for drier conditions down to 34 gpp
Portable Desiccant:
use for difficult to dry situations, such as difficult class-4 losses.
Use if a structure cannot be warmed to a temperature where LGR's would be effective.
Conventional:
Use for simple/small losses.
IICRC RSA
Wednesday, September 24, 2014
Dew Point
Dew point temperature
Dew point is the temperature at which air becomes saturated with moisture vapor, and can hold no more water vapor. When air is cooled, its capacity for water vapor is reduced. Eventually, if temperature is cooled enough, the relative humidity will reach 100%, or saturation. When this occurs, the air has reached its dew point temperature.
Calculating the dew point temperature is especially important when monitoring humid air masses. Typically, the most humid air mass in a structure affected by water intrusion will be the indoor air. Restorers then compare the Dew point to surface temperatures throughout the structure. If surfaces are cooler than the dew point of the surrounding air, water will condense on those surfaces and possibly cause secondary damage.
Note: Secondary damage can occur even if condensation does not. High humidity alone can result in secondary damage.
Calculating the dew point temperature is especially important when monitoring humid air masses. Typically, the most humid air mass in a structure affected by water intrusion will be the indoor air. Restorers then compare the Dew point to surface temperatures throughout the structure. If surfaces are cooler than the dew point of the surrounding air, water will condense on those surfaces and possibly cause secondary damage.
Note: Secondary damage can occur even if condensation does not. High humidity alone can result in secondary damage.
Tuesday, September 23, 2014
Summer is Over
Summer is Over
Last day of Summer was yesterday, where did the time go? Another Summer gone by and this blogger did not make it to Zion-Angles Landing or to Las Vegas to see BlueMan group. This Fall may be a good time to go with room rates slashed, the only big cost would be gas. The airlines have cut their flights and doubled ticket prices.
So What have I learned this short summer?
our trained certified technicians will be there to help with water extraction, mold remediation, water damage mitigation. Fire clean up and pack out.
We also have the best carpet & upholstery cleaning teams in Salt Lake & Utah counties.
Give us a call 24/7 even on holidays -- 801-506-0027
So What have I learned this short summer?
- Unexpected disasters can happen to anyone. A broken water line to a dishwasher, over flowed toilet ( Ok that may not sound correct) a backed up toilet, kid's filling the window well with water for a pool.
- Fire!!!! overheated oil, gas leak- whatever the cause is not an easy time.
- cleaning up a messing with a shop vac to only make the situation worse when the Vac blows everything around the entire house.
our trained certified technicians will be there to help with water extraction, mold remediation, water damage mitigation. Fire clean up and pack out.
We also have the best carpet & upholstery cleaning teams in Salt Lake & Utah counties.
Give us a call 24/7 even on holidays -- 801-506-0027
Monday, September 22, 2014
Swamp Cooler turn off now
Summer id over, time to cover the swamp cooler and turn off the water line. or this could happen
swamp cooler, time to turn off
We are at that time of year when you need to start thinking about turning off your swamp cooler. Turn the water line off and bleed the line. Water left on, this could happen to your home.
Tenant had left the home a few weeks earlier. A cold spell came and froze the line, water first found its way into the basement, then under the roofing and within a few days-a frozen water fall.
Friday, September 19, 2014
Thursday, September 18, 2014
Wednesday, September 17, 2014
Mold
Mold ten things to know
When Mold Is found, call the experienced service provider- ServiceMASTER of Salt Lake 801-506-0027
Ten Things You Should Know About Mold
- Potential health effects and symptoms associated with mold exposures include allergic reactions, asthma, and other respiratory complaints.
- There is no practical way to eliminate all mold and mold spores in the indoor environment; the way to control indoor mold growth is to control moisture.
- If mold is a problem in your home or school, you must clean up the mold and eliminate sources of moisture.
- Fix the source of the water problem or leak to prevent mold growth.
- Reduce indoor humidity (to 30-60%) to decrease mold growth by: venting bathrooms, dryers, and other moisture-generating sources to the outside; using air conditioners and de-humidifiers; increasing ventilation; and using exhaust fans whenever cooking, dish washing, and cleaning.
- Clean and dry any damp or wet building materials and furnishings within 24-48 hours to prevent mold growth.
- Clean mold off hard surfaces with water and detergent, and dry completely. Absorbent materials such as ceiling tiles, that are moldy, may need to be replaced.
- Prevent condensation: Reduce the potential for condensation on cold surfaces (i.e., windows, piping, exterior walls, roof, or floors) by adding insulation.
- In areas where there is a perpetual moisture problem, do not install carpeting (i.e., by drinking fountains, by classroom sinks, or on concrete floors with leaks or frequent condensation).
- Molds can be found almost anywhere; they can grow on virtually any substance, providing moisture is present. There are molds that can grow on wood, paper, carpet, and foods
Tuesday, September 16, 2014
Monday, September 15, 2014
IICRC Certified
IICRC certified
ServiceMaster technicians certification
At ServiceMaster of Salt Lake our technicians are certified in their jobs.
At ServiceMaster of Salt Lake and ServiceMaster Cleaning (Orem) we are proud of our certified technicians. Certification by Institute of Inspection and Cleaning Restoration.
- Qualified by service and examination with a satisfactory score to ascertain their competency
- Demonstrated a thorough and working knowledge of cleaning and restoration techniques to the satisfaction of an approved IICRC Instructor.
- Pledged themselves to strive constantly to promote the goodwill of those they serve and to use their best talents to preserve by proper care the properties of their customers.
- Agreed to subscribe and continue an effective training program approved by IICRC to upgrade themselves as a true professional.
- Pledged to hold above all else honesty and thoroughworkmanship in all their customer relations. ®
Friday, September 12, 2014
Thursday, September 11, 2014
water damage wall paper
Ugly wall paper & Water Damage.
What better time to change your ugly wall paper than when unexpected water damage occurs.
what better time to get new wall paper than after a water has flooded and damaged your walls
Wednesday, September 10, 2014
Psychrometric Chart
Psychrometric Chart
The Psychrometric Chart.
To properly evaluate temperature, relative humidity and grains per pound (or g/kg), restorers must use a psychrometric chart. Typically, a restorative drying technician will acquire a dry bulb temperature (either in Fahrenheit or Celsius) and a relative humidity using a thermohygrometer. These two readings establish the capacity of the air mass (temperature) to hold moisture and the relative amount of moisture in the air (relative humidity).
After acquiring these two readings, the technician can then employ the psychrometric chart to calculate GPP (Grains per pound). Other calculations are also made if necessary. Once these calculation are completed the technician compares them to surrounding conditions or previous conditions to evaluate drying potential.
To properly evaluate temperature, relative humidity and grains per pound (or g/kg), restorers must use a psychrometric chart. Typically, a restorative drying technician will acquire a dry bulb temperature (either in Fahrenheit or Celsius) and a relative humidity using a thermohygrometer. These two readings establish the capacity of the air mass (temperature) to hold moisture and the relative amount of moisture in the air (relative humidity).
After acquiring these two readings, the technician can then employ the psychrometric chart to calculate GPP (Grains per pound). Other calculations are also made if necessary. Once these calculation are completed the technician compares them to surrounding conditions or previous conditions to evaluate drying potential.
Tuesday, September 9, 2014
Antimicrobials & Biocides
Antimicrobials & Biocides
Antimicrobials & Biocides
Controlling microbial activity at a restoration site may also require the use of chemical agents. Before deciding to use an antimicrobial or biocide, it is critical to first understand the terminology, technology and chemistry behind the individual product. The Environmental Protection Agency ( EPA ) has defined three levels of biocidal activity:
° Sanitize: A cleaning or disinfecting treatment designed to
reduce the number of pathogenic
microorganisms to a safe level. This is the lowest
level of biocidal activity.
° Disinfectant: A solution designed to destroy or inhibit the
growth of microorganisms, but not
necessarily their spores.
° Sterilizer: A product designed to destroy all microorganisms
(fungi, bacteria, viruses, etc.) and their
spores.
(RSA [RS101] )
° Sanitize: A cleaning or disinfecting treatment designed to
reduce the number of pathogenic
microorganisms to a safe level. This is the lowest
level of biocidal activity.
° Disinfectant: A solution designed to destroy or inhibit the
growth of microorganisms, but not
necessarily their spores.
° Sterilizer: A product designed to destroy all microorganisms
(fungi, bacteria, viruses, etc.) and their
spores.
(RSA [RS101] )
Monday, September 8, 2014
Evaporation during water loss
Evaporation
What is Evaporation and how does it affect drying when recovering from a water loss?
We always want to remove as much water as possible in flood situation. One way is through Evaporation.all the standing water has been removed but there is moisture in material and air, this is when we want to increase evaporation to speed the drying process.
Evaporation will increase when
We always want to remove as much water as possible in flood situation. One way is through Evaporation.all the standing water has been removed but there is moisture in material and air, this is when we want to increase evaporation to speed the drying process.
Evaporation will increase when
- Wet materials are made warmer.
- When drier air is used, and
- When air is moved more rapidly across the wet surface.
Friday, September 5, 2014
Vapor Pressure in a water loss
Vapor Pressure
What is Vapor Pressure measured for in a water loss/flood situation? Helps to know this during drying process for placement of proper equipment.
Pressure of water on surrounding surfaces and objects, measured in inches of mercury. Directly related to GPP and Dew point. Vapor pressure is the force that drives higher concentrations of humidity from one space to another- vapor pressure always seeks equilibrium.
(RSA 101)
Pressure of water on surrounding surfaces and objects, measured in inches of mercury. Directly related to GPP and Dew point. Vapor pressure is the force that drives higher concentrations of humidity from one space to another- vapor pressure always seeks equilibrium.
(RSA 101)
Thursday, September 4, 2014
Drying Flood
Drying flood
Drying from water loss
In place drying
When performing in-place drying, more air-movers are needed for fast evaporation.
When performing in-place drying, more air-movers are needed for fast evaporation.
- In a class 2 or class 3 water loss, air movers are placed every 10'-16' along the wall. ( if you use metric 3-4 m) along the wall.
- Air movers are directed toward the wall at a 15° to 45° angle, depending upon the type of air mover.
- The air mover snout will almost touch the wall, which means within 1" (again, if you are metric- 2.5 cm ) of the wall but not rubbing it.
Wednesday, September 3, 2014
Tuesday, September 2, 2014
What our blog should be....
What should our blog be?
I was recently told that to be effective a blog should have at minimum, 250 words per post. That the content should be of interest and relative to our followers. That it should always contain KEY words that relate to our business. We should be able to link to our Facebook page and Twitter feed. We should add photos-(see above)
So the key words for today are......we do Carpet Cleaning, Upholstery Cleaning, Leather Cleaning, Rug Cleaning, Tile and Grout cleaning, Carpet Protector, Odor control, Spotting kits & refills, Mold Remediation, Water Extraction, Water Damage Mitigation, Disaster Restoration, Wet Checks, Fire and Water Damage Restoration, ServiceMaster of Salt Lake, ServiceMaster Cleaning. SLC 801-506-0027; Orem-Provo 801-356-7105 and a link...https://www.facebook.com/pages/ServiceMaster-Cleaning-of-Salt-Lake-and-Utah-Counties/124892290922559?ref=hl
So the key words for today are......we do Carpet Cleaning, Upholstery Cleaning, Leather Cleaning, Rug Cleaning, Tile and Grout cleaning, Carpet Protector, Odor control, Spotting kits & refills, Mold Remediation, Water Extraction, Water Damage Mitigation, Disaster Restoration, Wet Checks, Fire and Water Damage Restoration, ServiceMaster of Salt Lake, ServiceMaster Cleaning. SLC 801-506-0027; Orem-Provo 801-356-7105 and a link...https://www.facebook.com/pages/ServiceMaster-Cleaning-of-Salt-Lake-and-Utah-Counties/124892290922559?ref=hl
Subscribe to:
Posts (Atom)